M/T：021-59748222
E-mail：SH@szv.cn
QQ：652033616
Address：No.2651, Waiqingsong Road, Baihe Town, Qingpu District, Shanghai
Actuator maximum shutoff delta pressure is the maximum differential pressure (between inlet & outlet) that the actuator still could hold out the close position. Normally control valve shall not be
Globe control valves body is jointed with its applicable bonnet with a bolt and nuts just like two pipe jointed together with a flange. However, the gasket type in the control valve is differing from
See also,Non Destructive Test (NDE) for Casting and Forging Valves BodyAll welds at valve body or bonnet shall be 100% NDE as per BPV Section VIII Division 1.Any welding (including procedure, performa
Electromagnetic valve magnetic coil is produced after electrify force to overcome the pressure drive springs attract valve core, and a magnetic coil, simple structure, low price, can achieve switch, M
According to the actual operation of nuclear power valveResilient Seated Gate Valves conditions, nuclear power, its technical characteristics and requirements of the valve thermal valve higher than th
Electrical-pneumatic converter as a regulator,its main function is to change electric controller or computer's current signal to air pressure signal,and transfer topneumatic actuator mechanism.Of
1. Must inspect the valves cave and sealing surface before installation. Not allowed the dirt or sand attachment.2. Bolts connect with every position should be uniform tightened.3. Check the packing a
In order to successfully realize the process automation, the most important thing is to ensure that the valve itself to meet the process and the special requirements of medium inside the tubes. Produc
微信扫一扫
简体中文
English